OPE Performance Wheel Warranty
OPE Wheels warrants that its wheels with a period of 5-year structural integrity and a 3-year cosmetic finish except conditions listed under “Warranty Exclusion”.
When does the Warranty Begin?
The Warranty begins on the original retail purchase date.
Under this warranty, OPE wheels will be held only accountable to replace or repair of any wheels which falls under defective. Too Fast Inc will only be liable for repairing or replacing the defect wheel, Too Fast Inc is free of any collateral damages.
All warranty wheels need to be inspected by OPE Wheels. Wheels covered by our warranty will be replaced or repaired and returned to the sender by OPE wheels. Wheels fail to fall under coverage, a freight charge will be collected by OPE Wheels.
Warranty Coverage:
With proof of proper care under OPE Wheels Service Guidelines and there is no evidence of physical impact,
OPE Wheels warranties wheels with a radical/lateral run out greater than 500 μm.
OPE Wheels warranties wheels with cracks, leaks air.
OPE Wheels warranties imperfections on finish including peeling of the paint; bubbles in the paint.
Warranty Exclusions:
Structural damages due to installation, excessive off-road use, impact from accident, exceeding the load rating, a combination of tire and wheels does not follow the factory guidance.
Paint defect caused by installation, improper user treatment, physical impacts and damages, corrosion from environment and chemicals.
Warranty filed by non-original owner.
Wheels do not meet the fitment guidance.
Wheels with a previous history of repair, powder coating and other refinishes.
Wheels were used with accessories did not follow the guidance.
Wheels were installed on vehicle which modified to a different suspension geometry compared to
factory spec.
Wheel Maintenance:
Proper maintenance is required to keep the wheel finish in good condition. An improper treatment will result in peeling of clear coat and corrosion, to prevent your warranty being voided, following measures shall be considered:
Avoid sudden temperature change on your wheels, an extreme change in temperature on your wheel will cause disfigurement and unrepairable damages.
Wheels are specially machined/finished are not recommend for winter use. Snow Melter, salt and extreme humidity will speed the process of corrosion.
Wash your wheels on a weekly basis with non-detergent soap and water, using a soft brush or Sponge. Removing salt, dirt and brake dust will avoid corrosion and maintain the finish.
