{"title":"Aftermarket 5.5 Inch Lift Kits","description":"Elevate your ride with our premium selection of aftermarket 5.5 inch lift kits, designed for car enthusiasts and performance drivers seeking unmatched quality and performance. Engineered for durability and precision, these lift kits deliver optimal suspension enhancement, allowing you to conquer any terrain with confidence. Trust in our range of top-tier brands to elevate both your vehicle's look and performance. Upgrade your rig today and experience the ultimate combination of style and functionality.","products":[{"product_id":"5-5-inch-lift-kit-w-radius-arm-ram-2500-19-24-4wd-gas","title":"5.5 Inch Lift Kit w\/ Radius Arm | Ram 2500 (19-24) 4WD | Gas","description":"\u003cp\u003eTake your RAM 2500 gas powered truck to the next level with this 5.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes progressive rate Pro-Ride coil springs, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680746283140,"sku":"BDS1681FS","price":4796.08,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680746315908,"sku":"BDS1681H","price":3836.08,"currency_code":"CAD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":41680746348676,"sku":"BDS1681FPE","price":9167.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-Radius-Arm-Ram-2500-19-24-4WD-Gas.jpg?v=1790382061"},{"product_id":"5-5-inch-lift-kit-w-4-link-ram-2500-19-24-4wd-gas","title":"5.5 Inch Lift Kit w\/ 4-Link | Ram 2500 (19-24) 4WD | Gas","description":"\u003cp\u003eBuilt to outperform, BDS Suspension engineered a 5.5-inch lift kit with 4-Link conversion for your 2019-2027 RAM 2500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes progressive rate Pro-Ride coil springs, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003e4-Link Conversion\u003c\/h2\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680746446980,"sku":"BDS1689FS","price":5100.08,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680746479748,"sku":"BDS1689H","price":4140.08,"currency_code":"CAD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":41680746512516,"sku":"BDS1689FPE","price":9471.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-4-Link-Ram-2500-19-24-4WD-Gas.jpg?v=1790382082"},{"product_id":"5-5-inch-lift-kit-w-radius-arm-ram-2500-14-18-4wd-gas","title":"5.5 Inch Lift Kit w\/ Radius Arm | Ram 2500 (14-18) 4WD | Gas","description":"\u003cp\u003eTake your 2014-2018 RAM 2500 gas powered truck to the next level with a 5.5-inch lift kit with radius arm by BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes progressive rate Pro-Ride coil springs, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680746709124,"sku":"BDS2101FS","price":4741.74,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680746741892,"sku":"BDS2101H","price":3781.74,"currency_code":"CAD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":41680746774660,"sku":"BDS2101FPE","price":9113.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-Radius-Arm-Ram-2500-14-18-4WD-Gas.jpg?v=1790382118"},{"product_id":"5-5-inch-lift-kit-w-4-link-ram-2500-14-18-4wd-gas","title":"5.5 Inch Lift Kit w\/ 4-Link | Ram 2500 (14-18) 4WD | Gas","description":"\u003cp\u003eBuilt to outperform, BDS Suspension engineered a 5.5-inch lift kit with 4-Link conversion for your 2014-2018 RAM 2500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes progressive rate Pro-Ride coil springs, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003e4-Link Conversion\u003c\/h2\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This weld\/bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680747659396,"sku":"BDS1606FS","price":5368.88,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680747692164,"sku":"BDS1606H","price":4408.88,"currency_code":"CAD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":41680747724932,"sku":"BDS1606FPE","price":9740.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-4-Link-Ram-2500-14-18-4WD-Gas.jpg?v=1790382200"},{"product_id":"5-5-inch-lift-kit-w-4-link-ram-3500-13-18-4wd-gas","title":"5.5 Inch Lift Kit w\/ 4-Link | Ram 3500 (13-18) 4WD | Gas","description":"\u003cp\u003eBuilt to outperform, BDS Suspension engineered a 5.5-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003e4-Link Conversion\u003c\/h2\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"4 Inch Block Kit \/ NX2 Nitro Series","offer_id":41680748150916,"sku":"BDS1780H","price":3788.08,"currency_code":"CAD","in_stock":true},{"title":"4 Inch Block Kit \/ FOX 2.0 Performance Series","offer_id":41680748183684,"sku":"BDS1780FS","price":4748.08,"currency_code":"CAD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.5 Performance Elite","offer_id":41680748216452,"sku":"BDS1620FPE","price":10587.84,"currency_code":"CAD","in_stock":true},{"title":"4 Inch Block Kit \/ FOX 2.5 Performance Elite","offer_id":41680748249220,"sku":"BDS1780FPE","price":9119.44,"currency_code":"CAD","in_stock":true},{"title":"5 Inch Block Kit \/ FOX 2.5 Performance Elite","offer_id":41680748281988,"sku":"BDS1608FPE","price":9189.84,"currency_code":"CAD","in_stock":true},{"title":"5 Inch Block Kit \/ FOX 2.0 Performance Series","offer_id":41680748314756,"sku":"BDS1608FS","price":4818.48,"currency_code":"CAD","in_stock":true},{"title":"5 Inch Block Kit \/ NX2 Nitro Series","offer_id":41680748347524,"sku":"BDS1608H","price":3858.48,"currency_code":"CAD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.0 Performance Series","offer_id":41680748380292,"sku":"BDS1620FS","price":6216.48,"currency_code":"CAD","in_stock":true},{"title":"Leaf Springs \/ NX2 Nitro Series","offer_id":41680748413060,"sku":"BDS1620H","price":5256.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-4-Link-Ram-3500-13-18-4WD-Gas.jpg?v=1790382256"},{"product_id":"5-5-inch-lift-kit-w-4-link-ram-3500-19-23-4wd-gas","title":"5.5 Inch Lift Kit w\/ 4-Link | Ram 3500 (19-24) 4WD | Gas","description":"\u003cp\u003eRaise your RAM 3500 gas powered truck to the next heights with this 5.5-inch lift kit with 4-Link conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms and conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength steel lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003e4-Link Conversion\u003c\/h2\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Without Factory Rear Overload Leaf \/ FOX 2.0 Performance Series","offer_id":41680750837892,"sku":"BDS1694FS","price":4732.08,"currency_code":"CAD","in_stock":true},{"title":"Without Factory Rear Overload Leaf \/ NX2 Nitro Series","offer_id":41680750870660,"sku":"BDS1694H","price":3772.08,"currency_code":"CAD","in_stock":true},{"title":"With Factory Rear Overload Leaf \/ FOX 2.0 Performance Series","offer_id":41680750903428,"sku":"BDS1695FS","price":4732.08,"currency_code":"CAD","in_stock":true},{"title":"With Factory Rear Overload Leaf \/ NX2 Nitro Series","offer_id":41680750936196,"sku":"BDS1695H","price":3772.08,"currency_code":"CAD","in_stock":true},{"title":"Without Factory Rear Overload Leaf \/ FOX 2.5 Performance Elite","offer_id":41680750968964,"sku":"BDS1694FPE","price":9103.44,"currency_code":"CAD","in_stock":true},{"title":"With Factory Rear Overload Leaf \/ FOX 2.5 Performance Elite","offer_id":41680751001732,"sku":"BDS1695FPE","price":9103.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-4-Link-Ram-3500-19-24-4WD-Gas.jpg?v=1790382410"},{"product_id":"5-5-inch-lift-kit-w-radius-arm-ram-3500-19-23-4wd-gas","title":"5.5 Inch Lift Kit w\/ Radius Arm | Ram 3500 (19-24) 4WD | Gas","description":"\u003cp\u003eRaise your RAM 3500 gas powered truck to the next heights with this 5.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Without Factory Rear Overload Leaf \/ FOX 2.0 Performance Series","offer_id":41680751624324,"sku":"BDS1686FS","price":4428.08,"currency_code":"CAD","in_stock":true},{"title":"Without Factory Rear Overload Leaf \/ NX2 Nitro Series","offer_id":41680751657092,"sku":"BDS1686H","price":3468.08,"currency_code":"CAD","in_stock":true},{"title":"With Factory Rear Overload Leaf \/ FOX 2.0 Performance Series","offer_id":41680751689860,"sku":"BDS1687FS","price":4428.08,"currency_code":"CAD","in_stock":true},{"title":"With Factory Rear Overload Leaf \/ NX2 Nitro Series","offer_id":41680751722628,"sku":"BDS1687H","price":3468.08,"currency_code":"CAD","in_stock":true},{"title":"Without Factory Rear Overload Leaf \/ FOX 2.5 Performance Elite","offer_id":41680751755396,"sku":"BDS1686FPE","price":8799.44,"currency_code":"CAD","in_stock":true},{"title":"With Factory Rear Overload Leaf \/ FOX 2.5 Performance Elite","offer_id":41680751788164,"sku":"BDS1687FPE","price":8799.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-Radius-Arm-Ram-3500-19-24-4WD-Gas.jpg?v=1790382477"},{"product_id":"5-5-inch-lift-kit-w-radius-arm-ram-3500-13-18-4wd-gas","title":"5.5 Inch Lift Kit w\/ Radius Arm | Ram 3500 (13-18) 4WD | Gas","description":"\u003cp\u003eTake your 2013-2018 RAM 3500 gas powered truck to the next level by installing a 5.5-inch lift kit with radius arms engineered by BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy duty tubular radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680752148612,"sku":"BDS2105FS","price":4191.34,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680752181380,"sku":"BDS2105H","price":3231.34,"currency_code":"CAD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":41680752214148,"sku":"BDS2105FPE","price":8562.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-Radius-Arm-Ram-3500-13-18-4WD-Gas.jpg?v=1790382515"},{"product_id":"5-5-inch-lift-kit-toyota-tacoma-trd-pro-17-20-4wd","title":"5.5 Inch Lift Kit | Toyota Tacoma TRD Pro (17-23) 4WD","description":"\u003cp\u003eThe BDS 5.5-inch lift kit build on the performance and capability of the 2017-2023 Toyota Tacoma TRD Pro by adding some extra altitude to clear larger tires while correcting suspension, steering, and driveline geometry. Kits are designed to retain the front FOX internal bypass coilovers and rear FOX internal bypass shocks. \u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics. Up front, the kit utilizes top mounted strut spacers, high-arched 1\/4-inch thick steel crossmembers along with a multipiece differential relocation brackets and heavy duty skid plates built for offroad protection. Steering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles utilizing factory tie rod ends allowing for ESC system compatibility. These combined with the provided sway bar drops, bump stop extensions, brake line brackets, lower control arm cams, supplied hardware and more provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear, this kit utilizes heavy duty cast steel lift blocks, brake line bracket and longer u-bolts. Finishing off the rear shock extensions designed to retain the factory FOX shocks.\u003c\/p\u003e\n\u003ch2\u003eHigh Clearance Crossmembers\u003c\/h2\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003ch2\u003eHeavy Duty Steering Knuckles\u003c\/h2\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with factory tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":41680803496068,"sku":"BDS834H","price":3172.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-Toyota-Tacoma-TRD-Pro-17-23-4WD.jpg?v=1790385079"},{"product_id":"5-5-inch-lift-kit-fox-2-5-coil-over-chevy-colorado-or-gmc-canyon-15-22-4wd","title":"5.5 Inch Lift Kit | FOX 2.5 Coil-Over | Chevy Colorado or GMC Canyon (15-22) 4WD","description":"\u003cp\u003eBuilt to outperform, upgrade your Chevy Colorado and GMC Canyon 4WD truck by installing a 5.5-inch suspension lift kit with FOX 2.5 Coilover shocks by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 33\" tires. These kits feature proprietary FOX 2.5 coil-over shocks, designed to deliver bolt-on performance, increased travel, and the ability to soak up the roughest terrain, along with smooth on-road comfort.\u003c\/p\u003e\n\u003cp\u003eThis kit leverages BDS's tried-and-true high-clearance design for improved ground clearance, strength, and off-road protection, while correcting suspension and steering geometry for excellent on-road handling. Up front, the kit utilizes FOX 2.5 coil-over shocks, high-arched 1\/4-inch-thick steel crossmembers, a multipiece differential relocation bracket, and heavy-duty skid plates built for off-road protection. Steering geometry is corrected at the new, taller ride height with CNC-machined ductile-iron steering knuckles and replacement tie rod ends, allowing for ESC system compatibility. These, combined with the provided sway bar links, bump stop extensions, CV spacers, supplied hardware, and more, provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear, BDS offers a heavy-duty fabricated lift block to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also, for the rear, new u-bolts and precision-tuned FOX 2.0 Performance Series shocks for the best ride on and off road.\u003c\/p\u003e\n\u003ch2\u003eFOX 2.5 Coilovers\u003c\/h2\u003e\n\u003cp\u003eFOX 2.5 coilovers offer next-level performance and on-road and off-road comfort. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter coil-overs are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity, keeping your shocks running cool so you can push the limits in rough terrain.\u003c\/p\u003e\n\u003ch2\u003eHigh Clearance Crossmembers\u003c\/h2\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy-duty 1\/4-inch-thick, laser-cut, perfect-fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003ch2\u003eHeavy Duty Steering Knuckles\u003c\/h2\u003e\n\u003cp\u003eBDS corrects steering geometry at the new, taller ride height with a pair of high-strength, CNC-machined, ductile cast-iron steering knuckle designs that work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.5 Coil-Overs with DSC Adjuster","offer_id":41680815882372,"sku":"BDS722FDSC","price":7000.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-FOX-2_5-Coil-Over-Chevy-Colorado-or-GMC-Canyon-15-22-4WD.jpg?v=1790386209"},{"product_id":"5-5-inch-lift-kit-ram-3500-13-18-4wd-gas","title":"5.5 Inch Lift Kit | Ram 3500 (13-18) 4WD | Gas","description":"\u003cp\u003eImprove the ride and style of your 2013-2018 RAM 3500 gas powered truck with this 5.5-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, radius arms drop brackets, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"4 Inch Block Kit \/ FOX 2.0 Performance Series","offer_id":41680816078980,"sku":"BDS1781FS","price":3628.16,"currency_code":"CAD","in_stock":true},{"title":"4 Inch Block Kit \/ NX2 Nitro Series","offer_id":41680816111748,"sku":"BDS1781H","price":2668.16,"currency_code":"CAD","in_stock":true},{"title":"5 Inch Block Kit \/ FOX 2.0 Performance Series","offer_id":41680816144516,"sku":"BDS1607FS","price":3698.56,"currency_code":"CAD","in_stock":true},{"title":"5 Inch Block Kit \/ NX2 Nitro Series","offer_id":41680816177284,"sku":"BDS1607H","price":2738.56,"currency_code":"CAD","in_stock":true},{"title":"Leaf Springs \/ FOX 2.0 Performance Series","offer_id":41680816210052,"sku":"BDS1619FS","price":5096.56,"currency_code":"CAD","in_stock":true},{"title":"Leaf Springs \/ NX2 Nitro Series","offer_id":41680816242820,"sku":"BDS1619H","price":4136.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-Ram-3500-13-18-4WD-Gas.jpg?v=1790386255"},{"product_id":"5-5-inch-lift-kit-w-radius-arm-ram-3500-w-rear-air-ride-13-18-4wd-gas","title":"5.5 Inch Lift Kit w\/ Radius Arm | Ram 3500 w\/ Rear Air Ride (13-18) 4WD | Gas","description":"\u003cp\u003eTake your 2013-2018 RAM 3500 gas powered truck to the next level with this 6-inch radius arm lift kit from BDS Suspension. Engineered for trucks factory equipped with rear air ride. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy duty radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacers, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680847306884,"sku":"BDS2107FS","price":4599.34,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680847339652,"sku":"BDS2107H","price":3639.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-Radius-Arm-Ram-3500-w-Rear-Air-Ride-13-18-4WD-Gas.jpg?v=1790387825"},{"product_id":"5-5-inch-lift-kit-w-4-link-ram-2500-w-rear-air-ride-19-22-4wd-gas","title":"5.5 Inch Lift Kit w\/ 4-Link | Ram 2500 w\/ Rear Air Ride (19-24) 4WD | Gas","description":"\u003cp\u003eTake your RAM 2500 with rear air ride gas powered truck to the next level with this 5.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680848060548,"sku":"BDS1739FS","price":4989.01,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680848093316,"sku":"BDS1739H","price":4029.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-4-Link-Ram-2500-w-Rear-Air-Ride-19-24-4WD-Gas.jpg?v=1790387880"},{"product_id":"5-5-inch-lift-kit-w-4-link-ram-3500-w-rear-air-ride-19-23-4wd-gas","title":"5.5 Inch Lift Kit w\/ 4-Link | Ram 3500 w\/ Rear Air Ride (19-24) 4WD | Gas","description":"\u003cp\u003eRaise your RAM 3500 gas powered truck equipped with factory rear air bags to new heights with this 5.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacers, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680848322692,"sku":"BDS1734FS","price":5168.0,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680848355460,"sku":"BDS1734H","price":4208.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-4-Link-Ram-3500-w-Rear-Air-Ride-19-24-4WD-Gas.jpg?v=1790387914"},{"product_id":"5-5-inch-lift-kit-w-4-link-ram-3500-w-rear-air-ride-13-18-4wd-gas","title":"5.5 Inch Lift Kit w\/ 4-Link | Ram 3500 w\/ Rear Air Ride (13-18) 4WD | Gas","description":"\u003cp\u003eBuilt to outperform, BDS Suspension engineered a 5.5-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 gas powered truck that will surely impress. Works only on trucks equipped with factory rear air ride. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacers, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003e4-Link Conversion\u003c\/h2\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680848650372,"sku":"BDS1652FS","price":5226.48,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680848683140,"sku":"BDS1652H","price":4266.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-4-Link-Ram-3500-w-Rear-Air-Ride-13-18-4WD-Gas.jpg?v=1790387965"},{"product_id":"5-5-inch-lift-kit-w-radius-arm-ram-2500-w-rear-air-ride-14-18-4wd-gas","title":"5.5 Inch Lift Kit w\/ Radius Arm | Ram 2500 w\/ Rear Air Ride (14-18) 4WD | Gas","description":"\u003cp\u003eBuilt to outperform, BDS Suspension engineered a 5.5-inch lift kit with radius arm for your 2014-2018 RAM 2500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. BDS also supplies new air ride leveling sensor brackets to re-position the ride height sensors allowing it to perform just like it does at factory ride height and maintain full air bag range of motion.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680850157700,"sku":"BDS2103FS","price":4498.54,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680850190468,"sku":"BDS2103H","price":3538.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-Radius-Arm-Ram-2500-w-Rear-Air-Ride-14-18-4WD-Gas.jpg?v=1790388068"},{"product_id":"5-5-inch-lift-kit-long-arm-jeep-wrangler-jk-07-18-2-door","title":"5.5 Inch Lift Kit | Long Arm | Jeep Wrangler JK (07-18) 2-Door","description":"\u003cp\u003eMaximize the capability of your 2007-2018 Jeep Wrangler 2 Door with this 5.5-inch lift kit featuring a long-arm conversion from BDS Suspension. Designed to improve stance, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires. This 4-inch lift kit system enhances the factory 4-link by introducing a redesigned 4-link long arm, which improves articulation and offers better control throughout wheel travel.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes new pivot mounts that are constructed from 1\/4\" thick steel and work with the latest heavy-duty lower flex arms and adjustable upper flex arms to optimize handling characteristics, 4\" Pro-Ride coil springs capable of full coil bind, and 3\" bump stop extensions to control the compression travel, but increase wheel travel. Also included are braided stainless steel brake lines, sway bar links, a front track bar relocation bracket, and a pitman arm, all designed to improve steering and handling geometry.\u003c\/p\u003e\n\u003cp\u003eIn the rear, the kit utilizes new pivot mounts designed to work with the latest heavy-duty lower flex arms and adjustable upper flex arms, Pro-Ride coil springs, sway bar drop brackets, and a rear frame-mounted track bar relocation bracket to correct axle shift. Round out this 4\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/p\u003e\n\u003ch2\u003eLong Arm Conversion\u003c\/h2\u003e\n\u003cp\u003eUpgrading the standard control arms to long arms adds strength, improves handling, and takes off-road articulation to the next level. This upgrade consists of massive 1\/4\" steel frame-mounted brackets to install the oversized upper and lower formed long arms. The arms are designed for maximum tire clearance, allowing the stock control arm tabs to remain in place on the vehicle. The upper arms are made of solid stock, while the heavy-wall tubular lower arms utilize oversized, greaseable polyurethane bushings for superior road vibration isolation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive-rate Pro-Ride coil springs is supplied to provide the correct lift height and a smooth, predictable ride across various terrains. Manufactured from high-tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameters to ensure optimal performance. This results in maximum reliability without premature coil bind.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.5 Performance Elite \/ Disconnects","offer_id":41680850550916,"sku":"BDS1421FPE","price":10200.85,"currency_code":"CAD","in_stock":true},{"title":"FOX 2.0 Performance Series \/ Disconnects","offer_id":41680850583684,"sku":"BDS1421FS","price":6168.69,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series \/ Disconnects","offer_id":41680850616452,"sku":"BDS1421H","price":5208.69,"currency_code":"CAD","in_stock":true},{"title":"FOX 2.0 Performance Series \/ Fixed Links","offer_id":41680850649220,"sku":"BDS1422FS","price":6024.61,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series \/ Fixed Links","offer_id":41680850681988,"sku":"BDS1422H","price":5064.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-Long-Arm-Jeep-Wrangler-JK-07-18-2-Door.jpg?v=1790388091"},{"product_id":"5-5-inch-lift-kit-w-radius-arm-ram-2500-w-rear-air-ride-19-22-4wd-gas","title":"5.5 Inch Lift Kit w\/ Radius Arm | Ram 2500 w\/ Rear Air Ride (19-24) 4WD | Gas","description":"\u003cp\u003eTake your rear air ride equipped RAM 2500 gas powered truck to the next level with this 5.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680856580228,"sku":"BDS1737FS","price":4685.01,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680856612996,"sku":"BDS1737H","price":3725.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-Radius-Arm-Ram-2500-w-Rear-Air-Ride-19-24-4WD-Gas.jpg?v=1790388427"},{"product_id":"5-5-inch-lift-kit-w-radius-arm-ram-3500-w-rear-air-ride-19-23-4wd-gas","title":"5.5 Inch Lift Kit w\/ Radius Arm | Ram 3500 w\/ Rear Air Ride (19-24) 4WD | Gas","description":"\u003cp\u003eRaise your gas powered RAM 3500 with factory rear air bags truck to next heights with this 5.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength steel lift block, heavy duty air bag spacer, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680856940676,"sku":"BDS1726FS","price":4864.0,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680856973444,"sku":"BDS1726H","price":3904.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-Radius-Arm-Ram-3500-w-Rear-Air-Ride-19-24-4WD-Gas.jpg?v=1790388474"},{"product_id":"5-5-inch-lift-kit-ram-3500-w-rear-air-ride-13-18-4wd-gas","title":"5.5 Inch Lift Kit | Ram 3500 w\/ Rear Air Ride (13-18) 4WD | Gas","description":"\u003cp\u003eImprove the ride and style of your 2013-2018 RAM 3500 gas powered truck, equipped with rear air ride from the factory, with this 5.5-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, radius arms drop brackets, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacers, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680857890948,"sku":"BDS1651FS","price":4106.56,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680857923716,"sku":"BDS1651H","price":3146.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-Ram-3500-w-Rear-Air-Ride-13-18-4WD-Gas.jpg?v=1790388606"},{"product_id":"5-5-inch-lift-kit-ram-2500-w-rear-air-ride-14-18-4wd-gas","title":"5.5 Inch Lift Kit | Ram 2500 w\/ Rear Air Ride (14-18) 4WD | Gas","description":"\u003cp\u003eTake your rear air ride equipped 2014-2018 RAM 2500 gas powered truck to the next level with this 5.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty radius arms drop brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. BDS also supplies new air ride leveling sensor brackets to re-position the ride height sensors allowing it to perform just like it does at factory ride height and maintain full air bag range of motion.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680858579076,"sku":"BDS1630FS","price":5125.68,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680858611844,"sku":"BDS1630H","price":4165.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-Ram-2500-w-Rear-Air-Ride-14-18-4WD-Gas.jpg?v=1790388657"},{"product_id":"5-5-inch-lift-kit-w-4-link-ram-2500-w-rear-air-ride-14-18-4wd-gas","title":"5.5 Inch Lift Kit w\/ 4-Link | Ram 2500 w\/ Rear Air Ride (14-18) 4WD | Gas","description":"\u003cp\u003eBuilt to outperform, BDS Suspension engineered a 5.5-inch lift kit with 4-Link conversion for your 2014-2018 RAM 2500 gas powered truck that will surely impress. Works on factory air ride trucks only. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. BDS also supplies new air ride leveling sensor brackets to re-position the ride height sensors allowing it to perform just like it does at factory ride height and maintain full air bag range of motion.\u003c\/p\u003e\n\u003ch2\u003e4-Link Conversion\u003c\/h2\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This weld\/bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680858644612,"sku":"BDS1629FS","price":4005.76,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680858677380,"sku":"BDS1629H","price":3045.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-w-4-Link-Ram-2500-w-Rear-Air-Ride-14-18-4WD-Gas.jpg?v=1790388663"},{"product_id":"5-5-inch-lift-kit-ram-2500-14-18-4wd-gas","title":"5.5 Inch Lift Kit | Ram 2500 (14-18) 4WD | Gas","description":"\u003cp\u003eTake your 2014-2018 RAM 2500 gas powered truck to the next level with this 5.5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty radius arm drop brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes progressive rate Pro-Ride coil springs, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680859005060,"sku":"BDS1605FS","price":4248.96,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680859037828,"sku":"BDS1605H","price":3288.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-Ram-2500-14-18-4WD-Gas.jpg?v=1790388686"},{"product_id":"5-5-inch-lift-kit-chevy-colorado-or-gmc-canyon-15-22-4wd","title":"5.5 Inch Lift Kit | Chevy Colorado or GMC Canyon (15-22) 4WD","description":"\u003cp\u003eTake your Chevy Colorado and GMC Canyon 4WD truck to the next level with a 5.5-inch suspension lift kit by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 33\" tires.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics. Up front, the kit utilizes top mounted strut spacers, high-arched 1\/4-inch thick steel crossmembers along with a multipiece differential relocation brackets and heavy duty skid plates built for offroad protection. Steering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles and replacement tie rod ends allowing for ESC system compatibility. These combined with the provided sway bar links, bump stop extensions, CV spacers, supplied hardware and more provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear BDS offers a heavy duty fabricated lift block to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also for the rear are new u-bolts and precision tuned NX2 Nitro or premium FOX 2.0 Performance Series shocks.\u003c\/p\u003e\n\u003ch2\u003eHigh Clearance Crossmembers\u003c\/h2\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy duty 1\/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003ch2\u003eHeavy Duty Steering Knuckles\u003c\/h2\u003e\n\u003cp\u003eBDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.0 Performance Series","offer_id":41680880828548,"sku":"BDS722FS","price":3695.36,"currency_code":"CAD","in_stock":true},{"title":"NX2 Nitro Series","offer_id":41680880861316,"sku":"BDS722H","price":3215.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/products\/5_5-Inch-Lift-Kit-Chevy-Colorado-or-GMC-Canyon-15-22-4WD.jpg?v=1790390301"},{"product_id":"5-5-inch-lift-kit-fox-2-5-coil-over-chevy-colorado-or-gmc-canyon-15-22-4wd-1","title":"5.5 Inch Lift Kit | FOX 2.5 Coil-Over | Chevy Colorado or GMC Canyon (15-22) 4WD","description":"\u003cp\u003eBuilt to outperform, upgrade your Chevy Colorado and GMC Canyon 4WD truck by installing a 5.5-inch suspension lift kit with FOX 2.5 Coilover shocks by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 33\" tires. These kits feature proprietary FOX 2.5 coil-over shocks, designed to deliver bolt-on performance, increased travel, and the ability to soak up the roughest terrain, along with smooth on-road comfort.\u003c\/p\u003e\n\u003cp\u003eThis kit leverages BDS's tried-and-true high-clearance design for improved ground clearance, strength, and off-road protection, while correcting suspension and steering geometry for excellent on-road handling. Up front, the kit utilizes FOX 2.5 coil-over shocks, high-arched 1\/4-inch-thick steel crossmembers, a multipiece differential relocation bracket, and heavy-duty skid plates built for off-road protection. Steering geometry is corrected at the new, taller ride height with CNC-machined ductile-iron steering knuckles and replacement tie rod ends, allowing for ESC system compatibility. These, combined with the provided sway bar links, bump stop extensions, CV spacers, supplied hardware, and more, provide a comprehensive front suspension lift ready for whatever you throw at it.\u003c\/p\u003e\n\u003cp\u003eIn the rear, BDS offers a heavy-duty fabricated lift block to lift and level that stance. The lift block installs in place of the stock block and retains ride quality and load capacity. Also, for the rear, new u-bolts and precision-tuned FOX 2.0 Performance Series shocks for the best ride on and off road.\u003c\/p\u003e\n\u003ch2\u003eFOX 2.5 Coilovers\u003c\/h2\u003e\n\u003cp\u003eFOX 2.5 coilovers offer next-level performance and on-road and off-road comfort. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter coil-overs are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity, keeping your shocks running cool so you can push the limits in rough terrain.\u003c\/p\u003e\n\u003ch2\u003eHigh Clearance Crossmembers\u003c\/h2\u003e\n\u003cp\u003eBDS maximizes ground clearance with their heavy-duty 1\/4-inch-thick, laser-cut, perfect-fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.\u003c\/p\u003e\n\u003ch2\u003eHeavy Duty Steering Knuckles\u003c\/h2\u003e\n\u003cp\u003eBDS corrects steering geometry at the new, taller ride height with a pair of high-strength, CNC-machined, ductile cast-iron steering knuckle designs that work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"FOX 2.5 Coil-Overs","offer_id":44749398933636,"sku":"BDS722F","price":6408.96,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/files\/5_5-Inch-Lift-Kit-FOX-2_5-Coil-Over-Chevy-Colorado-or-GMC-Canyon-15-22-4WD_8e621a26.jpg?v=1790838140"},{"product_id":"5-5-inch-lift-kit-w-radius-arm-ram-3500-25-26-4wd-gas","title":"5.5 Inch Lift Kit w\/ Radius Arm | Ram 3500 (25-26) 4WD | Gas","description":"\u003cp\u003eThis BDS Suspension extended travel 5.5-inch Radius Arm Lift kit Designed specifically for Gas-powered Ram 3500 trucks improves ride quality, handling, and off-road capability while maintaining excellent on-road comfort. With clearance for up to 37-inch tires, it delivers a more aggressive stance while preserving proper driveline geometry and everyday drivability.\u003c\/p\u003e\u003cp\u003eUp front, the kit features Pro-Ride coil springs engineered to support the added weight of the Gas platform while providing a smooth, controlled ride. Heavy-duty replacement radius arms play a critical role in the system by properly positioning the front axle and correcting caster angles lost when lifting the truck. By restoring proper suspension geometry, these radius arms improve straight-line stability, steering return-to-center, braking control, and overall ride quality, while their reinforced construction adds strength and durability for both on-road and off-road use. A heavy-duty track bar bracket is included to properly center the front axle and maintain precise steering geometry. Also included is a brand-new 10-bolt transfer case indexing ring engineered to clock the transfer case for optimized driveline angles and increased suspension droop. This indexing ring features an all-new, industry-leading seal developed specifically for motorsports applications, delivering superior sealing performance, reduced friction, and long-term durability under extreme heat and speed. By properly clocking the transfer case, this system provides longer suspension travel and improved off-road capability compared to basic lift kits that do not re-index the transfer case. Additional components include sway bar links, brake line brackets, and premium shock absorbers matched to your selected configuration.\u003c\/p\u003e\u003cp\u003eIn the rear, lift is achieved using a high-strength fabricated lift block with longer U-bolts to ensure a secure and reliable installation. Matching rear shocks are included to maintain balanced ride quality and consistent performance from front to rear.\u003c\/p\u003e\u003cp\u003eShock options allow you to fine-tune ride quality and performance to match your driving style. BDS NX2 Nitro shocks provide a comfortable, well-controlled ride for daily driving and light off-road use. FOX 2.0 Performance Series IFP shocks feature aluminum construction and internal floating piston technology for consistent, fade-free performance. FOX 2.5 Performance Series IFP shocks increase oil capacity and cooling for enhanced damping control in more aggressive terrain. At the top level, FOX 2.5 Performance Elite Series shocks with Dual Speed Compression (DSC) adjusters deliver race-inspired performance and tunability, allowing independent adjustment of low- and high-speed compression for maximum control and versatility.\u003c\/p\u003e\u003cp\u003eBuilt with BDS Suspension’s uncompromising commitment to strength, ride quality, and long-term reliability, this 5.5-inch radius arm lift kit is the ideal upgrade for Ram 3500 owners seeking improved handling, corrected suspension geometry, increased suspension travel, and confidence-inspiring performance both on and off the road.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"5 Inch Block Kit Without Overload \/ FOX 2.5 Performance Elite","offer_id":52692869906564,"sku":"BDS2184FPE","price":8831.44,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit Without Overload \/ FOX 2.0 Performance Series","offer_id":52692869939332,"sku":"BDS2184FS","price":4460.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit Without Overload \/ NX2 Nitro Series","offer_id":52692869972100,"sku":"BDS2184H","price":3500.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit Without Overload \/ FOX 2.5 Performance Series HTO","offer_id":52692870004868,"sku":"BDS2184PS","price":5228.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit With Overload \/ FOX 2.5 Performance Elite","offer_id":52692870037636,"sku":"BDS2185FPE","price":8831.44,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit With Overload \/ FOX 2.0 Performance Series","offer_id":52692870070404,"sku":"BDS2185FS","price":4460.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit With Overload \/ NX2 Nitro Series","offer_id":52692870103172,"sku":"BDS2185H","price":3500.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit With Overload \/ FOX 2.5 Performance Series HTO","offer_id":52692870135940,"sku":"BDS2185PS","price":5228.08,"currency_code":"CAD","in_stock":false},{"title":"6 Inch Block Kit With OE Air Assist \/ FOX 2.5 Performance Elite","offer_id":52692870168708,"sku":"BDS2186FPE","price":9383.44,"currency_code":"CAD","in_stock":false},{"title":"6 Inch Block Kit With OE Air Assist \/ FOX 2.0 Performance Series","offer_id":52692870201476,"sku":"BDS2186FS","price":5012.08,"currency_code":"CAD","in_stock":false},{"title":"6 Inch Block Kit With OE Air Assist \/ NX2 Nitro Series","offer_id":52692870234244,"sku":"BDS2186H","price":4052.08,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/files\/5_5-Inch-Lift-Kit-w-Radius-Arm-Ram-3500-25-26-4WD-Gas.jpg?v=1790971204"},{"product_id":"5-5-inch-lift-kit-w-4-link-ram-3500-25-26-4wd-gas","title":"5.5 Inch Lift Kit w\/ 4-Link | Ram 3500 (25-26) 4WD | Gas","description":"\u003cp\u003eThis BDS Suspension extended travel 5.5-inch 4-Link Lift Kit, designed specifically for Gas-powered Ram 3500 trucks, improves ride quality, handling, and off-road capability while maintaining excellent on-road comfort. With clearance for up to 37-inch tires, it delivers a more aggressive stance while preserving proper driveline geometry and everyday drivability.\u003c\/p\u003e\u003cp\u003eUp front, the kit features Pro-Ride coil springs engineered to support the  weight of the Gas platform while providing a smooth, controlled ride. A heavy-duty 4-link front suspension system replaces the factory control arms to properly position the front axle while significantly reducing suspension bind through the full range of travel. By allowing each link to articulate independently, the 4-link design maintains more consistent caster and pinion angles, improving straight-line stability, steering return-to-center, braking control, and overall ride quality both on and off the road. The reinforced link construction delivers exceptional strength and long-term durability for demanding on-road use, towing, and off-road conditions.\u003c\/p\u003e\u003cp\u003eA heavy-duty track bar bracket is included to properly center the front axle and maintain precise steering geometry. Also included is a brand-new 10-bolt transfer case indexing ring engineered to clock the transfer case for optimized driveline angles and increased suspension droop. This indexing ring features an all-new, industry-leading seal developed specifically for motorsports applications, delivering superior sealing performance, reduced friction, and long-term durability under extreme heat and speed. By properly clocking the transfer case, this system allows increased suspension travel and improved off-road capability compared to lift kits that do not re-index the transfer case. Additional components include sway bar links, brake line brackets, and premium shock absorbers matched to your selected configuration.\u003c\/p\u003e\u003cp\u003eIn the rear, lift is achieved using a high-strength fabricated lift block with longer U-bolts to ensure a secure and reliable installation. Matching rear shocks are included to maintain balanced ride quality and consistent performance from front to rear.\u003c\/p\u003e\u003cp\u003eShock options allow you to fine-tune ride quality and performance to match your driving style. BDS NX2 Nitro shocks provide a comfortable, well-controlled ride for daily driving and light off-road use. FOX 2.0 Performance Series IFP shocks feature aluminum construction and internal floating piston technology for consistent, fade-free performance. FOX 2.5 Performance Series IFP shocks increase oil capacity and cooling for enhanced damping control in more aggressive terrain. At the top level, FOX 2.5 Performance Elite Series shocks with Dual Speed Compression (DSC) adjusters deliver race-inspired performance and tunability, allowing independent adjustment of low- and high-speed compression for maximum control and versatility.\u003c\/p\u003e\u003cp\u003eBuilt with BDS Suspension’s uncompromising commitment to strength, ride quality, and long-term reliability, this 5.5-inch 4-link lift kit is the ideal upgrade for Ram 3500 owners seeking improved handling, corrected suspension geometry, increased suspension travel, and confidence-inspiring performance both on and off the road.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"5 Inch Block Kit Without Overload \/ FOX 2.5 Performance Elite","offer_id":52692870398084,"sku":"BDS2187FPE","price":9135.44,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit Without Overload \/ FOX 2.0 Performance Series","offer_id":52692870430852,"sku":"BDS2187FS","price":4764.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit Without Overload \/ NX2 Nitro Series","offer_id":52692870463620,"sku":"BDS2187H","price":3804.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit Without Overload \/ FOX 2.5 Performance Series HTO","offer_id":52692870496388,"sku":"BDS2187PS","price":5532.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit With Overload \/ FOX 2.5 Performance Elite","offer_id":52692870529156,"sku":"BDS2188FPE","price":9135.44,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit With Overload \/ FOX 2.0 Performance Series","offer_id":52692870561924,"sku":"BDS2188FS","price":4764.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit With Overload \/ NX2 Nitro Series","offer_id":52692870594692,"sku":"BDS2188H","price":3804.08,"currency_code":"CAD","in_stock":false},{"title":"5 Inch Block Kit With Overload \/ FOX 2.5 Performance Series HTO","offer_id":52692870627460,"sku":"BDS2188PS","price":5532.08,"currency_code":"CAD","in_stock":false},{"title":"6 Inch Block Kit With OE Air Assist \/ FOX 2.5 Performance Elite","offer_id":52692870660228,"sku":"BDS2189FPE","price":9687.44,"currency_code":"CAD","in_stock":false},{"title":"6 Inch Block Kit With OE Air Assist \/ FOX 2.0 Performance Series","offer_id":52692870692996,"sku":"BDS2189FS","price":5316.08,"currency_code":"CAD","in_stock":false},{"title":"6 Inch Block Kit With OE Air Assist \/ NX2 Nitro Series","offer_id":52692870725764,"sku":"BDS2189H","price":4356.08,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/9676\/7108\/files\/5_5-Inch-Lift-Kit-w-4-Link-Ram-3500-25-26-4WD-Gas.jpg?v=1790971207"}],"url":"https:\/\/toofastautoparts.ca\/collections\/5-5-inch-lift-kit.oembed","provider":"Too Fast Auto Parts","version":"1.0","type":"link"}